Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Thank you
for choosing another quality product from Amperes Electronics.
Amperes has upgraded the protocols in PD series paging microphones, MatriMix as well as PMX system. With this
harmonised data, all the equipments can be used or interchanged seamlessly. As such, the firmware of TD6240 has
been upgraded as well, to cater for the needs.
We shall endeavor to make products with contemporary needs and yet expandable for future upgrades. We are
sure you make the right decision to choose Amperes, which is not only offering the product that meets your budget,
but perform beyond your expectation.
We appreciate that you read through the manual to avoid any mishandling as well as to explore the full potential this
unit can offer. Keep this manual for future reference and we believe that you are getting an optimum product in its
class.
INSTRUCTION MANUAL
DIGITAL PAGING MICROPHONE
PD2800
version 3
harmonised protocol
VER 3 SEP 2010
Advertisement
Table of Contents
Related Manuals for Amperes PD2800
Summary of Contents for Amperes PD2800
- Page 1 We shall endeavor to make products with contemporary needs and yet expandable for future upgrades. We are sure you make the right decision to choose Amperes, which is not only offering the product that meets your budget, but perform beyond your expectation.
-
Page 2: Product Descriptions
Product Descriptions PD2800 gets better in this version while offering the same flexibility in installation and operation. 108 zones can be stored under 9 groups of 12 zones each and 9 priority levels can be set at the paging console. - Page 3 Use a DC24V power adaptor supplied for powering the unit. 13. Paging Mic Connection Connect to the paging mic via this RJ45 connector. For pin configuration, refer to the diagram. amperes PD2800 Digital Paging Microphone PAGE 3...
-
Page 4: Application Schematic
Application Schematic Please ensure that priority level is set at each paging console PD2800 Paging Mic before operating. Unit 2 Each loop / circuit may consist of several paging mics, which PD2800 Paging Mic can be set at different priority... -
Page 5: Connecting The Unit
Connecting The Unit For Single unit paging mic, set priority level to 0 (PD2800) or 00 (PD2400). Priority 1 is highest. Rear view of PD2800 Cat5e cable (supplied) Remote location EX2800 External Conn Unit 24V DC via power adaptor 2 pair screen cable (audio and RS485 data) To mixer input ;... - Page 6 Connecting The Unit ( Multi Point ) 2 nos Paging Mic in same circuit. PD2400/2800 Note : Can be set to either different priority or same level. PD2800 Paging Microphone Quality Product From AMPERES ELECTRONICS Cat5e 24V DC EX2800 PD2400/2800...
- Page 7 Connecting to MatrixMix MxP2188 Since that MxP2188 MatriMix system is capable to cater for larger quantity of zones ( 8 input to 128 outputs ), PD2800 has to be used as the paging mic for the system. More than one PD2800 can be installed.
-
Page 8: Unit Startup
Used primarily as parameter setting button are used during ENT : as Enter key setup of the unit Used to confirm an entry Press “0” button momentarily ( 3 seconds ) to enter Setup mode amperes electronics PAGE 8... -
Page 9: Save And Exit
ADD ( Next ) 6.SYSTEM INFO Firmware version infor- mation ADD ( Next ) To reset and clear 7.MEMORY REST memories to factory default ADD ( Next ) 8.SAVE & EXIT? amperes PD2800 Digital Paging Microphone PAGE 9... - Page 10 4 tone down chime Press UP/DOWN to select value Select the required chime 2.2 2dn Chime : type and press “0” to confirm Down 2 setting and return to main menu. Press “0” or ENT Return to CHIME menu amperes electronics PAGE 10...
-
Page 11: Zone Setting
Use this menu Press “Clear” or to select the user’s prefer- “Add” ence. Return to Menu 3 or 5 amperes PD2800 Digital Paging Microphone PAGE 11... -
Page 12: System Info
V02.12 the installed firmware This is an important info Press “ 0 ” when interfacing with exter- nal equipment, to check the compatibility as well as when Return to Menu 6 servicing is required. amperes electronics PAGE 12... - Page 13 Press group number The zones under Group 1 shall be automatically saved and the Set Group (0...9) screen shall revert to ready mode. Repeat the above steps to program other groupings. Return to Ready Mode amperes PD2800 Digital Paging Microphone PAGE 13...
-
Page 14: Operating The Unit
“ALL CALL” button again. In ALL CALL paging, all normal zones shall activated. This is however, would not energise 24V DC overriding supply to override volume controllers. To enable overriding, we recommend the usage of EP1200. amperes electronics PAGE 14... -
Page 15: Group Paging
1 km ( subject to cable size ) Memory duration 1 year Gooseneck mic length 400 mm Dimensions (WxHxD) 292 x 62 x 186 mm Weight ( kg ) 1.3 kg ( excl.adaptor) amperes PD2800 Digital Paging Microphone PAGE 15... - Page 16 Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes Electronics Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor, Malaysia or its authorized master distributor, Amperes Global Marketing.
Need help?
Do you have a question about the PD2800 and is the answer not in the manual?
Questions and answers