Page 1
PM1010 and PM1030 are newly designed desktop gooseneck microphones with contemporary outlooks suitable for general purpose paging applications. PM1010 is a basic version with simple press to talk without chime whereas its sibling, PM1030 comes with pre announcement chime, paging contact and chime volume controls, which is designed for commercial applications.
A 4 tone chime shall be broadcasted when the switch is pressed once and a downward 4 tone chime follows when the unit is switched off ( PM1030 only ). For PM1010, there is no chime output and once ON, the mic shall be activated immediately.
Page 3
Application Schematic PM1010 Select the correct PM1010 output level when connecting it to the Mixer input. PM1010 Balanced audio MIXER 2C SCREEN SELECT POWER SOURCE MASTER EXT INPUT TONE CTRL MX 2222 TUNER CASS amperes CHIME MIXER TREBLE BASS MUSIC SOURCE...
Relay Trigger terminals. Activation of PM1030 shall trigger All Call at zone selector as well as providing 24V DC output to override external volume controllers. Connecting to MX2322 Mixer Pre-Amplifier (Direct connecting PM1030 / PM1010 to MX2322 without External Box) cat5...
Page 5
Connecting To MA2000 Series Mixer Amplifier SIREN EMERGENCY / SIREN ACTIVE EP 1200 FIRE amperes SIREN SWITCH EMERGENCY PAGING PANEL Select the correct PM1030 output level when EP1200 connecting it to the Mixer input. PM1030 Balance Audio Output Dry Contact...
Page 6
Connecting to IP Based System PM1010 / PM1030 External Box PM1030 Set to Line Level DRY CONTACT BALANCED OUTPUT LINE LEVEL MIC LEVEL INPUT DC INPUT External Box iPX5151 / iPX5155 (Input Mode) iPX5151 / iPX5155 (Input Mode) iPX5200 MUSIC...
Technical Specification PM1010 PM1030 Operating voltage 24V DC 0.8W 1.3W Power consumption Talk, Mic ring Press to Talk Indicators Chime + Talk, Mic ring Microphone Cardioid condenser microphone 3A max Dry contact Audio Mic sensitivity -72 dB Omni directional Output impedance...
Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes Electronics Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor, Malaysia or its authorized dealers.
Need help?
Do you have a question about the PM1010 and is the answer not in the manual?
Questions and answers