Amperes PD2800 Instruction Manual
  1. Manuals
  2. Brands
  3. Amperes Manuals
  4. Microphone
  5. PD2800
  6. Instruction manual

Amperes PD2800 Instruction Manual

Digital paging microphone
Hide thumbs Also See for PD2800:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
PD2800
DIGITAL PAGING MICROPHONE
version 3
harmonised protocol
Thank you
for choosing another quality product from Amperes Electronics.
Amperes has upgraded the protocols in PD series paging microphones, MatriMix as well as PMX system. With this
harmonised data, all the equipments can be used or interchanged seamlessly. As such, the firmware of TD6240 has
been upgraded as well, to cater for the needs.
We shall endeavor to make products with contemporary needs and yet expandable for future upgrades. We are
sure you make the right decision to choose Amperes, which is not only offering the product that meets your budget,
but perform beyond your expectation.
We appreciate that you read through the manual to avoid any mishandling as well as to explore the full potential this
unit can offer. Keep this manual for future reference and we believe that you are getting an optimum product in its
class.
December 2012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PD2800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Amperes PD2800

Summary of Contents for Amperes PD2800

  • Page 1 We shall endeavor to make products with contemporary needs and yet expandable for future upgrades. We are sure you make the right decision to choose Amperes, which is not only offering the product that meets your budget, but perform beyond your expectation.

  • Page 2: Product Descriptions

    Product Descriptions PD2800 gets better in this version while offering the same flexibility in installation and operation. 108 zones can be stored under 9 groups of 12 zones each and 9 priority levels can be set at the paging console.
  • Page 3 Use a DC24V power adaptor supplied for powering the unit. 13. Paging Mic Connection Connect to the paging mic via this RJ45 connector. For pin configuration, refer to the diagram. amperes PD2800 Digital Paging Microphone PAGE 3...

  • Page 4: Application Schematic

    Application Schematic Please ensure that priority level is set at each paging console PD2800 Paging Mic before operating. Unit 2 Each loop / circuit may consist of several paging mics, which PD2800 Paging Mic can be set at different priority...
  • Page 5 Remote Connectivity via Fiber Rear view of PD2800 iPX5150 FX TX Link/ Fiber Optic Converter FDX/PWR FX TX Link/ Fiber Optic Converter FDX/PWR ETHERNET SERIAL NO : DC V iPx 5100 RS232 10BASE-T amperes ETHERNET PAGING MANAGEMENT SERVER ON/OFF RESET...

  • Page 6: Connecting The Unit

    Connecting The Unit For Single unit paging mic, set priority level to 0 (PD2800) or 00 (PD2400). Priority 1 is highest. Rear view of PD2800 Cat5e cable (supplied) Remote location EX2800 External Conn Unit 24V DC via power adaptor 2 pair screen cable (audio output and RS485 data) To mixer input ;...
  • Page 7 Connecting to IP Paging System Rear view of PD2800 Audio RS485 TD6240 Zone Decoder iPX5150 Triggering signal audio output (balanced) ETHERNET SERIAL NO : DC V iPx 5100 10BASE-T RS232 amperes ETHERNET PAGING MANAGEMENT SERVER ON/OFF RESET ETHERNET ADDRESS :...
  • Page 8 Connecting The Unit ( Multi Point ) 2 nos Paging Mic in same circuit. PD2400/2800 Note : Can be set to either different priority or same level. PD2800 Paging Microphone Quality Product From AMPERES ELECTRONICS Cat5e 24V DC EX2800 PD2400/2800...
  • Page 9 Connecting to MatrixMix MxP2188 Since that MxP2188 MatriMix system is capable to cater for larger quantity of zones ( 8 input to 128 outputs ), PD2800 has to be used as the paging mic for the system. More than one PD2800 can be installed.

  • Page 10: Unit Startup

    Used primarily as parameter setting button are used during ENT : as Enter key setup of the unit Used to confirm an entry Press “0” button momentarily ( 3 seconds ) to enter Setup mode PAGE 10 amperes electronics...
  • Page 11 6.SYSTEM ID ADD ( Next ) Firmware version infor- 7.SYSTEM INFO mation ADD ( Next ) To reset and clear memo- 8.MEMORY REST ries to factory default ADD ( Next ) 9.SAVE & EXIT? amperes PAGE 11 PD2800 Digital Paging Microphone...

  • Page 12: Setup - Sub Menu

    4 tone down chime Press UP/DOWN to select value Select the required chime 2.2 2dn Chime : type and press “0” to confirm Down 2 setting and return to main menu. Press “0” or ENT Return to CHIME menu PAGE 12 amperes electronics...

  • Page 13: Zone Setting

    Press “0” or ENT is required to be active for a longer period of time, such Return to TIMEOUT menu as making a long speech or performing a prayer using the PA system. amperes PD2800 Digital Paging Microphone PAGE 13...

  • Page 14: System Info

    V02.35 the installed firmware This is an important info Press “ 0 ” when interfacing with exter- nal equipment, to check the compatibility as well as when Return to Menu 6 servicing is required. amperes electronics PAGE 14...

  • Page 15: Memory Reset

    Press group number The zones under Group 1 shall be automatically saved and the Set Group (0...9) screen shall revert to ready mode. Repeat the above steps to program other groupings. Return to Ready Mode amperes PD2800 Digital Paging Microphone PAGE 15...

  • Page 16: All Call Paging

    “ALL CALL” button again. In ALL CALL paging, all normal zones shall activated. This is however, would not energise 24V DC overriding supply to override volume controllers. To enable overriding, we recommend the usage of EP1200. amperes electronics PAGE 16...

  • Page 17: Group Paging

    Frequency response 100 ~ 12 KHz > 60 dB at 1 KHz S/N ratio Gooseneck mic length 400 Ohm Dimensions (WxHxD) 292 x 62 x 186 mm (Body Only) Weight (kg) 1.3kg (excl. adaptor) amperes PD2800 Digital Paging Microphone PAGE 17...

  • Page 18: Communication Ports

    1. Link the PD2800 to PC as show in the Diagram 1 2. Run bootloader program at your PC and the windows should appear (Diagram 2) 3. At PD2800, press ‘0’ button - Select 7. System and Select 7.2 update 4. Press ‘enter’ for update 5.
  • Page 19 Communication Ports (Continue) Diagram 3 Diagram 4 Diagram 5 amperes PD2800 Digital Paging Microphone PAGE 19...
  • Page 20 Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes Electronics Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor, Malaysia or its authorized master distributor, Amperes Global Marketing.

Table of Contents