Call Settings; Connection Settings - AT&T Z432 User Manual

• Alert Type: Set the ring type (e.g. vibrate, ring, vibrate and ring, and
ascending ringtone).
• Receiver Volume: Set the volume of the receiver.
• Message Tone: Set the notification ringtone for an incoming SMS or
MMS message.
• Key Tone: Enable or disable keypad tones when dialing.
• Warning Tone: Turn the warning tone on or off.
• Power On/Off Tone: Turn on/off the sound that plays while powering
on/off the phone.
• Missed Calls Alert: Enable, disable, and set timing for the missed calls
audible notification.

Call Settings

From the home screen, select Main Menu Settings Call Settings.
Earphone Auto Answer: You can configure the phone to answer incoming
calls automatically when an earphone is connected to the phone.
Any Key to Mute: This option allows you to silence the ringtone by
pressing any key when there is an incoming call.
Connection Reminder: When a call connects, you will hear a three-tone
beep to notify you that the connection was successful.
Minute Reminder: When this setting is enabled, you will hear a short beep
every minute while a call is in progress. You will hear the first beep after 50
seconds, then 1 minute 50 seconds, etc.
Send My Caller ID: This function allows you to prevent others from seeing
your phone number when making outbound calls.
44
Set by Network: The network chooses whether to show/hide your
phone number.
On: The call recipient will see your phone number.
Off: The call recipient will not see your phone number.
Auto Redial: Sets the phone to repeatedly redial, in the event of a busy
signal, until it successfully makes a connection.
Call Forwarding: Allows you to reroute your incoming calls to another
phone number. Contact your service provider for more information
and availability.
Call Waiting: If a call comes in when you are already on a call, you will be
notified with a call waiting tone. The phone will display the caller's phone
number. If the caller is in your Address Book, their name will display also.
Contact your service provider for more information and availability.

Connection Settings

From the home screen, select Main Menu Settings Connection
Settings. You can configure the following options:
Bluetooth: Configure Bluetooth settings. See the Bluetooth section in this
manual for details.
Access Point: Add to, edit, or view the Access Point list.
Internet Profiles: Create or edit the connection data for a service
provider.
Modem: Set modem parameters. You can use a data cable to connect
the phone to a computer and use the phone as a modem. Consult your
service provider for details on which modem settings to use.
Settings Settings 45