HP ENVY Maintenance And Service Manual page 75

d. Remove the display bezel (4).
NOTE: When removing the display bezel, make note of the location of the double-sided adhesive
strip (5) on the display back cover.
The display bezel is available using spare part number 818101-001.
8. If it is necessary to replace the webcam/microphone module:
a. Remove the display bezel.
b. Detach the webcam/microphone module (1) from the display back cover. (The webcam/
microphone module is attached to the display back cover with double-sided adhesive.)
c. Disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
(The webcam/microphone module cable is part of the display panel cable.)
d. Remove the webcam/microphone module (3).
The webcam/microphone module is available using spare part number 812714-001.
Component replacement procedures 65