HP ENVY Maintenance And Service Manual page 74

6. Slide the top cover (3) forward and remove the display assembly.
7. If it is necessary to replace the display bezel:
a. Remove the two display bezel screw covers (1).
The display bezel screw covers are available in the Bezel Trim Kit, spare part number 818102-001.
b. Remove the two Phillips PM2.0×3.3 screws (2) that secure the display bezel to the display
back cover.
c. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display back cover.
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts