AT&T TL96271 Quick Start Manual page 18

Bluetooth setup
Add a headset
To pair and connect a headset:
. Press MENU
enter the main menu.
2. Press CID
press SELECT
SELECT
. Press
4. Press CID
press SELECT
followed by If headset is connected to cell, please
disconnect it.
5. Press NEXT
discoverable mode. Set your headset to discoverable
mode (refer to the user's manual of your headset),
then press
• All devices that are connected to the telephone
base are temporarily disconnected.
6. The screen displays Searching for Bluetooth headsets...
. When the screen displays the found devices, press
CID or DIR to highlight your headset and then
press SELECT
. Enter the PIN of your headset. The PIN for most
Bluetooth devices is 0000 (refer to the user's manual
of your headset). Then press
. The screen will display Adding Headset A to device
list... when the base is connecting to your headset.
0. When a device is successfully connected, the handset
displays Headset A is added and connected to base
and the corresponding status icon ( 1 or
hear a confirmation tone. The corresponding light on
the telephone base (DEVICE 1 or DEVICE 2) turns on.
If you have trouble pairing your headset, it may not
be compatible with your TL96271/TL96371/TL96471.
Check the Bluetooth compatibility list at
www.telephones.att.com
NOTE:
The pairing process may take up to one minute. If the pairing
process fails, try again.
on the telephone base in idle mode to
or DIR to highlight Bluetooth, then
.
to choose Add device.
or DIR to highlight Add headset, then
. The screen displays
. The screen displays Pls set headset to
NEXT .
.
Please wait...
NEXT
.
.

Directory
Cal ler ID log
Intercom
Bluetooth
BACK
Add device
Device list
Download dir
BACK
Add cel lular
Add headset
BACK
Pls set headset
to discoverable
mode
BACK
Searching for
headsets...
FOUND DEVICES
Headset A
Headset B
BACK
ADD HEADSET
2). You
Active devices
BACK
and connected
SELECT
BLUETOOTH
SELECT
DEVICE LIST
SELECT
NEXT
Bluetooth
SELECT
ENTER PIN
_ _ _ _
NEXT
Adding
Headset A
to device
list...
Headset A
is added
to base.