Bluetooth Setup - AT&T TL96271 Quick Start Manual

Bluetooth setup

Bluetooth wireless technology operates within a short range (up to 0 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone
base, keep the device within 5 feet of the telephone base for optimal
performance.
Add a cell phone
To pair and connect a cell phone:
. Press MENU
enter the main menu.
2. Press CID
press SELECT
. Press SELECT
CID
4. Press
press SELECT
followed by 1. If cell is connected to BT device,
please disconnect it.
Press NEXT. The screen displays 2. Place cell phone
5.
next to base.
NEXT
6. Press
discoverable mode. The screen displays Set cell to
search base: AT&T DECT 6.0 discoverable PIN: 0000.
Promptly turn on the Bluetooth feature of your cell
phone and search for or add new devices.
. Your cell phone may require a passcode. In this case
the handset screen displays Check cellular. ENTER
PASS CODE. Enter the cell phone passcode into the
handset and press
. Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process. The handset displays Adding Cell Phone A to
device list...
. When a device is successfully connected, the
telephone base displays Cell Phone A is added and
connected to base. You hear a confirmation tone.
The corresponding status icon (
The corresponding device light on the telephone base
(DEVICE 1 or DEVICE 2) turns on.
If you have trouble pairing your cell phone, it may not be compatible with
your TL96271/TL96371/TL96471. Check the Bluetooth compatibility list
www.telephones.att.com
at
NOTES:
• The pairing process may take up to one minute. If the pairing process fails, try again.
• The steps for the pairing process may vary for different cell phones. If this happens,
follow the prompts on your cell phone and your
complete the pairing process.
• Refer to the user's manual of your cell phone on how to search for or add a new
Bluetooth device.
on the telephone base in idle mode to
or DIR to highlight Bluetooth, then
.
to choose Add device.
DIR to highlight Add cellular, then
or
. The screen displays
to turn on the telephone base
SET to save.
Please wait...
1 or 2) displays.
.
TL96271/TL96371/TL96471
6
Directory
Cal ler ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
ADD DEVICE
Add cel lular
Add headset
BACK SELECT
Set cel l to
search base:
AT&T DECT 6.0
discoverable
PIN:0000
Adding
Cel l Phone A
to device
list...
Cel l Phone A
is added
and connected
to base.
to