Table of Contents
Advertisement
Front Panel Controls & Connectors
POWER ( O/I ) Switch
This is the main power switch for the repeater.
Power Indicator ( MAIN )
This LED glows green when the main power
source is used.
Power Indicator ( BACKUP )
This LED glows red when the backup power
source is used.
MIC Jack
Connect the microphone plug to this jack. This
jack is also used for writing and reading channel
frequency or other configurations via the USB
Port of the PC on which the clone editor ( CE60 )
is running.
Programmable Function ( PF ) Key
Six push buttons on the front panel are Program-
mable Function ( PF ) keys, each with an orange
indicator inside. Each key can be programmed
with two functions, one for a "long" press and
one for a "momentary" press. The PF key func-
tions may be customized, via programming by
your VERTEX STANDARD dealer, to meet your
communications network requirements. Note
that some functions may require the purchase of
optional internal accessories. The possible PF key
features and functions are explained on the pages
to follow.
VOL Knob
This control knob adjusts the output level of the
front speaker and external speaker jack on the
back panel.
2
TX Indicator
This LED glows red when the repeater is trans-
mitting.
Numeric Display
This display consists of two 7-segment LEDs, indi-
cating the channel number during normal opera-
tion. If an abnormal condition arises, an error code
will be displayed:
D
D
iSplay
Channel Number
01 - 30
Clone Active
PC
PLL Unlock
UL
High temperature in PA Unit
HI
Scan Active
SC
Front Panel Keys are locked
LC
PTT key is disabled
E1
Cooling Fan is disabled
E2
Low Voltage in Backup Battery
E5
PA Unit Abnormality
E7
Contact your dealer
E3, E4, E6, E9
BUSY Indicator
This LED glows green when the receiving chan-
nel is busy.
Speaker
The internal speaker is located here.
VXR-9000E FM R
eScRiption
O
EpEatER
pERating
M
anual
Advertisement
Table of Contents
