Logik L17LID648 User Manual page 33

SymPTOm
TV
Function key does not
respond correctly.
No sound is output
from the HDMI out.
DVD
No sound or only a
very low-level sound
is heard.
No picture.
The picture is not
clear.
Severe hum or noise is
heard.
The disc does not
play.
No audio output during
DVD playing.
TROUBLeSHOOTInG GUIDe
CaUSe (anD RemeDy)
• Under the influence of electrostatic phenomenon, the product may
malfunction and require user to power reset.
• Unplug and re-plug the AC power cord.
• Check the connection between this unit and the HDMI out jack of
other equipment.
• See if the TV supports this 480p/576p/720p/1080i DVD system.
• Check your TV system setup correctly.
• Make sure your TV supports HDCP (High Bandwidth Digital Content
Protection).
• Make sure that you select DVD mode.
• The system is in pause mode. Press the
to normal PLAY mode.
• Fast-forward or fast-reverse is performed. Press the
button to return to normal play mode.
• The unit is too hot, shut off the unit for 30 minutes to cool it
down.
• The region number of the disc doesn't match the region number of
this unit.
• Clean the disc.
• The disc is scratched.
• The plugs and jacks are dirty. Wipe them with a cloth slightly
moistened with alcohol.
• Clean the disc.
• There is no disc inside ("No Disc" appears on the screen).
• Insert the disc correctly with the playback side facing frontwards.
• Clean the disc.
• A non-valid disc has been inserted.The unit and disc region number
are incompatible.
• Condensation may have formed inside the unit due to a sudden
change in temperature. Wait about an hour for it to clear and try
again.
• It may not be possible to play CD-R/RW or DVD-R/RW in all cases
due to the type of disc or condition of the recording. If you are having
trouble playing a certain disc, remove the disc and try a different
one. Improper formatted disc will not play on this DVD player.
• Press aUDIO button to select the desired audio format.
PLay button to return
33
PLay