Table of Contents
Advertisement
COnneCTInG a TV aeRIaL/CaBLe/SaTeLLITe
To view television channels correctly, a signal must be
received from one of the following sources:
- An indoor or outdoor aerial
- A cable system
- A satellite system
Note:
For receiving over-the-air TV broadcasts, we recommend
that you use an external fixed aerial. Should you require
the use of a temporary aerial, please ensure that you
purchase an aerial with sufficient ability to receive in weak
signal areas. Only when you are in close proximity to a
transmitter will a temporary aerial reproduce a signal as
strongly as a fixed aerial.
COnneCTInG a POWeR CORD
•
Connect the AC power cord into a wall outlet.
•
Press the
/ I button on the unit or remote control to
turn on the unit.
Note:
•
Be sure the AC power cord is disconnected and the TV
is switched off before making connections.
•
Make sure that all the components are connected
correctly.
•
When you are not going to use the unit for a long period
of time, disconnect the power cord.
•
The apparatus should not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, should be placed on apparatus.
•
The mains plug is used as the disconnecting device.
It should remain readily accessible and should not be
obstructed during use. To be completely disconnected from the supply mains, the mains plug of the apparatus
should be disconnected from the mains socket outlet completely.
COmmOn InTeRFaCe
The unit is equipped with a CI slot. The CI slot allows you to insert a CAM (Conditional Access Module) with an
appropriate subscription card for some pay for view services.
It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial
broadcasting.
Fully insert the CAM (Conditional Access Module) into the CI (Common Interface) slot on the bottom of the unit
with its label side facing you.
Important notes:
•
Switch off the TV and unplug from the AC power mains before insert or remove the CAM.
•
The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the Cam is forcefully inserted.
•
Some CAMs may require setting up. Refer to the module instruction manual for details of the
settings.
COnneCTIOnS
TV
AERIAL
Satellite, Cable, or TV aerial cable
to TV AERIAL CABLE Terminal
(cable not included)
13
Hide quick links:
Advertisement
Table of Contents
