Setting The Search Area; Entering An Address - Hummer H3 2006 Manual

Setting the Search Area

To set the search area, do the following:
1. If a DVD map disc is not currently loaded, see
"Loading a DVD Map Disc" earlier in this section.
If a map disc is currently loaded, proceed to Step 2.
2. Press the power/volume knob to turn the system on.
3. Touch the DEST screen button.
4. Touch the Change screen button.
5. Touch the appropriate Search Area numbered
screen button that contains your final destination.
The system will return to the Destination menu.

Entering an Address

You can set a destination by entering an address.
To enter an address, do the following:
1. If a DVD map disc is not currently loaded, see
"Loading a DVD Map Disc" earlier in this section.
If a map disc is currently loaded, proceed to Step 2.
2. Press the power/volume knob to turn the system on.
3. Touch the DEST screen button.
4. Verify that the selected Search Area is correct.
5. Touch the Address screen button.
1-6
6. Enter the city name using the alpha keypad on the
screen.
7. Select the city name from the list by touching the
screen button next to the correct city name.
8. Enter the street name using the alpha keypad on
the screen.
Do not enter directional information or street type,
and use the space symbol screen button (
between street or city names. For example, the
street name N. Royal Oak Rd. should be entered as
U
royal oak. Use the backspace (
screen button if an incorrect character has been
entered.
9. Select the desired street name from the list by
touching the screen button next to the correct
street name.
10. Enter the address number using the numeric
keypad on the screen. You may first have to select
the correct range for the address number, then
enter the desired address and touch the OK screen
button.
11. Touch the Set Destination screen button. The
address entry is now complete.
12. Once you begin driving you will hear an audio
prompt to "Proceed to the highlighted route."
You are now in route guidance mode.
U
)
V
)