Audio Menu - Hummer H3 2006 Manual

Audio Menu

e (Audio): Press this hard key to display the audio
menu. Several adjustment options are available from
this menu.
Tone (Bass/Midrange/Treble): Touch the plus (+) and
minus (–) sign screen buttons to increase or decrease
the Bass, Midrange, or Treble. If a station is weak
or noisy, decrease the treble.
Speakers (Balance/Fade): Touch the L (left) or
R (right) screen buttons to adjust the balance between
the right and left speakers. Touch the Front or Rear
screen buttons to adjust the fade between the front and
rear speakers.
Speed Compensated Volume (SCV): With SCV, the
audio system will adjust automatically to make up
for road and wind noise as you drive, by increasing the
volume as vehicle speed increases. Touch the down
arrow screen button to access the second page of the
Audio menu. Set the volume at the desired level,
then select Low, Med, or High. Touch the Off screen
button to turn this feature off.
EQ (Equalizer): Use the screen buttons labeled EQ1
through EQ5 to choose preset bass, midrange, and
treble equalization settings. The Custom screen button
allows you to choose and set your own equalization
levels. To set a custom equalization setting, adjust each
setting to the desired level, then touch the Custom
screen button until you hear a beep.
After adjustments are made, press the BAND hard key
to go back to the preset station menu. Now that you
have preset the station and the EQ setting, you
can assign the EQ to the preset station. To do this,
touch the desired preset station screen button until you
hear a beep. The EQ setting will now be assigned to
that preset unless you decide to change it.
If you were at the CD screen before setting an EQ and
you press the CD hard key, you will be returned to
the CD screen, and the EQ will be set to that screen
until you change it.
See "Theft-Deterrent Feature", "Radio Reception", and
antenna information in the Index of your vehicle's owner
manual for more information.
3-5