Table of Contents
Advertisement
6. Attention:
Two people are required to remove the BPEs.
Remove the BPEs (item 1 in the illustration on page 95).
1 Bulk Power Enclosure
2 Hex-Head Screw Locations
a. Remove the five hex-head screws from the front BPE.
b. Remove the five hex-head screws from the rear BPE.
c. Install two shipping brackets (part number 11P2923) on both the front and rear of the frame using 8
M8 X 16mm bolts (part number 164803).
Appendix J. Removing and Installing the Rack Top Frame
95
Advertisement
Table of Contents
