Huawei LTE CPE B593 User Manual page 17

Indicator
WLAN
LAN1–LAN4
SIGNAL
16
State Description
Red This indicator is constantly red when the CPE fails to
access the wireless network or the CPE does not access
the wireless network.
Mulberry This indicator is on when the SIM cannot be identified or the
PIN is not entered or the PIN check fails.
Off This indicator is off when the CPE does not access the
wireless network.
On The WLAN function is enabled.
Blinking This indicator is blinking when data is transferred through
the WLAN.
Off The WLAN function is disabled.
On This indicator is on when an Ethernet device has been
connected to the relevant port.
Blinking Data is being transmitted over the corresponding port.
Off This indicator is off when an Ethernet device is not
connected to the relevant port.
On This is a five-bar indicator. The more bars that are on, the
stronger the wireless signals.
Off This indicator is off when no signal is detected.