Accessing The Screen, Leds And Actuator - Outdoor Lifestyles ODPALG-48 Owner's Manual

D. Accessing the Screen, LED's and Actua-

tor
If screen/actuator has failed in the up position, access to
the firebox can only be gained by removing the screen.
1. Turn off gas supply and disconnect main power to ap-
pliance before performing any maintenance.
2. Place a flat screwdriver between the front face and
screen of the appliance, at outside corners, locate the
two slots.
3. Gently pry up on both lower corners of the screen to
disengage the screen front from screen frame assem-
bly. (See Fig. 5.1)
4. Pull top of screen front away from appliance and lift
to remove. (See Fig. 5.2) Set screen front and screen
mesh aside. Access to the appliance firebox is now
possible.
16 Outdoor Lifestyles by Hearth & Home Technologies Inc. • Palazzo Owner's Manual • 4082-310 Rev. C • 11/15
Figure 5.1
Figure 5.2