Table of Contents
Advertisement
Description of "Control Change" MIDI Messages
"Control Change" MIDI Messages are 3 bytes length, defined as follow:
n =
MIDI Channel
(0x00 to 0x0F hexa)
or
(00 to 15 decimal)
Note:
MIDI channel 1 corresponds to n = 0
MIDI channel N corresponds to n = N-1
CC = Controller Number (0 to 127)
VV = Controller Value (0 to 127)
Control Change Examples
Generating controller 66 on MIDI Channel 7
Control Change number 66 is obtained with potentiometer 26, when group B is selected.
MIDI Channel 7 is obtained when LCD indicates 7 for the MIDI channel
Corresponding MIDI message is :
B6 42 VV
B6 indicates that a control change is sent on MIDI Channel 7
42 indicates that controller 42 (Hexadecimal or 66 decimal) is sent
VV Indicates potentiometer value
Generating controller 00 on MIDI Channel 16
Control Change number 00 is obtained with potentiometer 00, when group A is selected.
MIDI Channel 16 is obtained when LCD indicates 16 for the MIDI channel
Corresponding MIDI message is:
BF 00 VV
BF indicates that a control change is sent on MIDI Channel 16
00 indicates that controller 00 (Hexadecimal or 00 decimal) is sent
VV Indicates potentiometer value
Bn
CC
VV
9
Rev 3.1 - Page
Advertisement
Table of Contents
