Using Bitstream Pro In Mode 1: Control Change - Wave Idea Bitstream PRO Owner's Manual

Using BitStream Pro in Mode 1: Control Change

This mode is a universal MIDI mode that allows to control all soft synths (Reason, Live, ...) / gears
with very simple MIDI messages called "Control Change". BitStream can generate all 128 possible
Control Change, on all 16 MIDI channels.
This mode is the non-programmable mode, all the MIDI events described below are built-in the
Bitstream Pro.
Using the 3 groups allows to cover all 128 controllers as follow:
Group A: Potentiometers 0-39 send controllers 0-39
Switches 40-47 send controllers 40-47
Group B: Potentiometers 0-39 send controllers 40-79
Switches 40-47 send controllers 80-87
Group C: Potentiometers 0-39 send controllers 80-119
Switches 40-47 send controllers 120-127
Each potentiometer / Switch is able to send 3 different controllers depending on the current group. All
controllers are sent on the selected MIDI Channel that can be changed with the help of MIDI Channel
UP-DOWN pushbuttons
16 127
Control Change
8
Rev 3.1 - Page
127 A