Using The Snapshot Scene Memory - Wave Idea Bitstream PRO Owner's Manual

127
Offset = 25
Frequency Variation
Offset = 35
0

Using the Snapshot Scene Memory

This button is used to Save / restore value of all 48 controls (40 potentiometers + 8 Switches) to / from
memory.
Pushing this button during 3 seconds allows to save the state of all 48 controls in memory depending
on the selected group
* Saving Scene *
SNAPSHOT GRP X
Pushing this button one time and releasing it immediately send to MIDI OUT the value of all
potentiometers and switches that have been saved into Memory. All these controls are sent according
to the selected group.
* Scene Memory *
SNAPSHOT GRP X
This feature is used for live representations. There is one scene memory per group and all controls
are saved / restored according to the selected group.
All the controls are saved to a non-volatile memory; this means they can be retrieved even if the
controller has been turned off.
Note: This functions is available for the two operating modes (Control change & User defined)
14
Rev 3.1 - Page