Table of Contents
Advertisement
Potentiometers / Switches Numbering
The 3 groups (A, B, C) are shown at the top left of the above window
The 3 numbers indicated on each control correspond to the control number (CC#) sent by each
potentiometer or switch, depending on the selected group. These numbers are very useful for mode 1
(described in the next chapter), since the user is able to instantly know the controller sent.
All four bottom switches are pushbuttons type. They can be easily programmed as transport functions
(play, stop, forward, record) to externally control sequencers such as cubase, or other. On the other
hand, the four top switches latching type, they can be used with any ON/OFF function, ie mute, etc.
6
Rev 3.1 - Page
Advertisement
Table of Contents
