Chapter 5 Cloning Mode; Entering Cloning Mode; Cloning Using The Cloning Cable - Motorola DTR410 User Manual

Chapter 5 Cloning Mode

Cloning mode is used to either add contacts wirelessly to other radios (Private or Groups, not
supported on DTR410) or duplicate all radio settings to new radios (using the optional cloning cable).
Cloning also allows all radios to maintain a contact list so that User Name is shown rather than User
ID when receiving voice and data calls.
DTR410 radios do not support the PrivateCall feature, but when cloned from a DTR510 / DTR610
will retain User Name information for easier use.

Entering Cloning Mode

1. Press
2. Enter the cloning mode by performing the following steps in sequence:
a. Hold down
b. Press the Left
c. Press
d. Press the Right
e. Hold down

Cloning Using the Cloning Cable

1. From the Clone menu, scroll to select Duplicate Radio and press
lowing screen is displayed indicating the target radio must now be connected to the source
radio to be cloned using the cloning cable.
to turn the source radio on.
and press the PTT button three times.
.
.
and press the PTT button three times. The Clone Menu appears.
Clone Menu
uplicate Rad...
Send Contact
Select
onnect lone
able and
Press lone
lone
Reset
Back
under Select. The fol-