Table of Contents
Advertisement
4-2
Although factory programmed with default PublicGroups, DTR Series radios require user-specific
programming in order to fully benefit from their digital features.
This occurs in a separate programming mode which allows access to modify and add contacts,
update existing and add new quick notes, and access manager features (DTR610 only) such as
Remote Disable and Remote Monitoring. A mini keyboard (53967) is used to enter text into contacts
and to modify saved text messages.
The 53968 Cloning Cable allows easier programming as one radio can be programmed with all
contact information then duplicated in other radios. The DTR510 and DTR610 also have an over-the-
air cloning feature to send a contact to another radio.
New radios should be cloned using serial cloning. After this occurs, the unit ID can be sent to the
other radios via over-the-air or serial cloning.
Entering Programming Mode
The following key sequence must be performed to enter the programming mode.
1. Hold down
2. Press the Right
3. Press
4. Press the Left
5. Hold down
The Program Menu screen appears.
My Info
1. Highlight Contacts and press
2. Scroll to select it and press
3. Press
Changing your unit name will change how it appears on your idle display, but Unit ID instead of Unit
Name is transmitted to other radios. A receiving radio will show your unit name if your unit ID is in it's
contact list.
April 27, 2005
and press the PTT button three times.
.
.
.
and press the PTT button three times.
Program Menu
Contacts
Text Messages
ettings
elect
under View. Your unit name, ID, and channel are shown.
under Edit to change the unit name or channel.
Radio Programming: Entering Programming Mode
Reset
under Select. A
appears to the right of the display.
6881097C81-O
Hide quick links:
Advertisement
Table of Contents
