Switching The Comfort Function On And Off - Viessmann VITODENS 100-W Operating Instructions Manual

Settings
Domestic hot water

Switching the comfort function on and off

Further information can be found
in chapter "Terminology" in the Ap-
pendix.
14
(cont.)
Switching on:
Move rotary selector "tw" to the
required DHW temperature. The hot
water temperature can be adjusted
between 45 °C ("1") to 60 °C ("6").
If DHW heating is active, the display
shows "w".
Switching off:
Turn rotary selector "tw" to "0".
If the comfort function is switched on, the
instantaneous water heater is kept up to
temperature (standby). Hot water is
therefore quickly available.
Switching on the comfort function
Briefly turn rotary selector "tw" clock-
wise as far as it will go (for less than 2 s)
and turn anti-clockwise again.
"COMFORT" appears on the display.