Heating
Further information can be found
in chapter "Terminology" in the Ap-
pendix.
r
Domestic hot water
Further information can be found
in chapter "Terminology" in the Ap-
pendix.
Select the DHW temperature in accord-
ance with your personal requirements
(e.g. for showering).
Switching on:
Move rotary selector "tr" to the
required heating water temperature.
Note
If a room temperature control unit is con-
nected, use this unit to set the desired
room temperature. The number "1" to "6"
represents an approximate temperature
range of 30 °C to 80 °C, e.g. "1" = 30 °C,
"6" = 80 °C.
If central heating is active, the display
shows "r".
Switching off:
Turn rotary selector "rt" to "0".
Note
If the boiler does not have a DHW cylin-
der connected or an integral instantane-
ous water heater, turn rotary selector
"
tw " to "0".
Settings
13