Hoover Power Path Owner's Manual page 14

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the
checklist below.
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service
center prior to continuing use.
A WARNING A
To reduce the risk of personal injury - Unplug before cleaning or servicing.
PROBLEM
Cleaner won't
run
Cleaner won't
pick-up or low
suction
Water escap-
ing from
Cleaner
Cleaner won't
dispense
Motor noise
becomes
high-pitched
Brushrolls are
not spinning
POSSIBLE CAUSE POSSIBLE SOLUTION
2. Blown fuse or tripped breaker. 2. Check fuse or breaker in home. Replace fuse/reset
breaker in home.
hoov_
1. Dirty Water Tank is not installed 1. Review Placing Dirty Water Tank in base of cleaner
correctly. - Pg. 8.
3. Dirty water tank is clogged. 3. Clean Dirty Water Tank- Pg. 12.
i
1. Dirty Water Tank is full. 1. Emptying Dirty Water Tank - Pg. 8.
3. Clean Water Solution Tank not installed 3. Review Clean Water Solution Tank Installation - Pg. 8.
properly.
2. Clean Water Solution Tank not installed 2. Review CleanWater Solution Tank Installation - Pg. 7.
properly.
1. Dirty Water Tank is full. 1. Empty Dirty Water Tank - Pg. 8.
3. Air path is clogged. 3. Unclog air path.
1. Belt needs to be changed. 1. Referto how to change belt - Pg. 13.
14