Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Inspiron 17 5000 Series Service Manual

Removing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery.
2 Remove the
3 Follow the procedure from step 1 to step 3 in
4 Remove the
5 Remove the
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 4 in
drive".
8 Follow the procedure from step 1 to step 6 in
base".
9 Remove the
10 Remove the
11 Remove the

Procedure

1 Note the power-adapter-port cable routing and remove it from the
routing guides on the palm-rest assembly.
2 Remove the screw that secures the power-adapter port to the palm-rest
assembly.
3 Peel off the tape that secures the power-adapter port to the palm-rest
assembly.
base cover.
wireless card.
memory modules.
I/O board.
heat-sink assembly.
system board.
computer. After working inside your
After working inside your
"Removing the hard
"Removing the optical
"Removing the computer
drive".
71