Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 17 5000 Series Service Manual

Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery.
2 Remove the
3 Follow the procedure from step 1 to step 3 in
4 Remove the
5 Remove the
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 4 in
drive".
8 Follow the procedure from step 1 to step 6 in
base".
9 Remove the
10 Remove the
11 Remove the
12 Remove the

Procedure

1 Note the antenna cable routing and remove the cable from its routing
guides.
74
base cover.
wireless card.
memory modules.
I/O board.
heat-sink assembly.
system board.
power-adapter port.
computer. After working inside your
After working inside your
"Removing the hard
"Removing the optical
"Removing the computer
drive".