Crank Replacement Procedure - Johnson C7000 Service Manual

CRANK REPLACEMENT PROCEDURE

Tools required:
Crank extractor
Coin
Open-end
wrench
(14&17mm)
the axle.
3 Using the crank extractor and open-end wrench to
extract the crank then replace it with a new one.
4 Reverse step 1-3 to install the parts
Procedure:
1 Loosen the crank
cover with a coin and
remove it.
2 With the crank
extractor and
open-end wrench
loosen the screw
attaching the crank to