Johnson R7000 Owner's Manual

To remove the paddle from a Johnson R7000 rowing machine, follow these steps:

1. Turn off and unplug the machine for safety.

2. Locate the paddle assembly. The paddle (or flywheel) is usually housed in the front casing of the rower.

3. Remove the outer casing:
- Use a screwdriver or appropriate tool to remove the screws or bolts securing the front cover.
- Carefully lift off the cover to expose the paddle mechanism.

4. Identify the paddle attachment:
- The paddle is typically connected to a central axle or flywheel assembly.
- Look for retaining bolts, nuts, or clips holding the paddle in place.

5. Loosen and remove the fasteners:
- Use the correct size tools (e.g., wrench or Allen key) to loosen the bolts or screws.
- Carefully slide the paddle off the axle or shaft.

6. Inspect and clean or replace as needed.

7. Reassemble the machine:
- Once the paddle is removed or replaced, reattach all parts in reverse order.
- Ensure all fasteners are tightened securely and the cover is properly aligned.

Note: Take pictures during disassembly to help with reassembly.

This answer is automatically generated