Check - Sony HCD-MC3AV Service Manual

QQ
3 7 63 1515 0
MAGNET ASSY ALIGNMENT
1. Check that there is no disc in the unit and then turn ON the power. Open the door, and set a disc in the PLUS ONE slit.
2. Close the door, and while pressing the
3. Press the CHECK button, and set the loading mode.
4. Press the + ‚± button and chuck the disc.
5. Adjust the magnet assembly and magnet holder so that A = B as shown in the figure.
A B
DISC HOLDER A ALIGNMENT
1. Check that there is no disc in the unit and then turn ON the power. Open the door, and set a disc in the PLUS ONE slit.
2. Close the door, and while pressing the
3. Press the CHECK button, and set the loading mode.
4. Press the + ‚± button and chuck the disc.
TE
L 13942296513
5. Press + ‚± or ≠º – button to stop the disc holder A slightly away from the disc.
6. Rotate and adjust the adjusting screw so that the center of the disc and that of the disc holder coincide.
Disc
www
.
http://www.xiaoyu163.com
p button, ENTER button and GROUP 5 button simultaneously.
Magnet ASSY
Magnet holder
p button, ENTER button and GROUP 5 button simultaneously.
a b
Disc holder A
a = b
x ao
y
i
— 20 —
http://www.xiaoyu163.com
8
Magnet ASSY
Q Q
3 6 7 1 3
Disc holder A
Disc
u163
.
2 9 9 4 2 8
Screw (For adjustment)
1 5 0 5 8 2 9 9 4
Screw (For adjustment)
m
co
9 9
2 8 9 9