Step 6: Quick Setup; Playback; Playing Discs - Sony DVP-NS508P Service Manual

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press .. The on-
screen displays differ depending on the player model. Oceanian model is used for illustration
unless otherwise specified.
1 4
Turn on the TV. Press ENTER without inserting a
disc.
2
Press [/1.
The Setup Display for selecting the
language used in the on-screen display
3
Switch the input selector on your
appears.
The available languages differ depending
TV so that the signal from the
upon the player model.
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
(press enter to run Quick Setup) appears
at the bottom of the screen. If this
message does not appear, select
"QUICK" (quick) under "SETUP"
(setup) in the Control Menu to run Quick
Setup (page 49).
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
4
Press Z on the player, and place a
disc on the disc tray.

Playback

Playing Discs

Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
Playback side facing down
with your disc.
5
Press H.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the audio
component.
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 23. For VIDEO CDs,
Number
see page 24.
buttons
TIME/TEXT
CLEAR
To turn off the player
TOP MENU MENU
Press [/1. The player enters standby mode.
ENTER
RETURN
DISPLAY
z Hint
REPLAY ADVANCE
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
ZOOM
"AUTO POWER OFF" in "CUSTOM SETUP" to
SLOW PLAY
"ON" or "OFF" (page 52).
FAST PLAY
/SUBTITLE
/ANGLE
Note
Discs created on DVD recorders must be correctly
1
finalized before they can be played. For more
Turn on your TV.
information about finalizing, refer to the operating
instructions supplied with the DVD recorder.
2
Press [/1.
Notes on playing DTS sound tracks on a
The player turns on.
DVD VIDEO
3
• DTS audio signals are output only through
Switch the input selector on your
the DIGITAL OUT (COAXIAL or
TV so that the signal from the
OPTICAL) jack.
• When you play a DVD VIDEO with DTS
player appears on the TV screen.
sound tracks, set "DTS" to "ON" in
◆ When using an audio component
"AUDIO SETUP" (page 54).
Turn on the audio component and select • If you connect the player to audio
the appropriate channel so that you can equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
hear sound from the player.
(page 54). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
ENTER
LANGUAGE SETUP
OSD: ENGLISH
MENU:
ENGLISH
AUDIO:
FRANÇAIS
SUBTITLE:
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
,continued
19
,continued
21
DVP-NS47P/NS57P/NS508P/NS64P/NS67P/NS608P
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER: 4:3 LETTER BOX
BACKGROUND: 4:3 PAN SCAN
PROGRESSIVE
(COMPONENT OUT ONLY)
MODE :
(PROGRESSIVE)
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 50)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 50)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component such as an amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
If you did not connect an audio
component, select "NO," then go to step
13.
If you connected an audio component
using just an audio cord, select "YES:
LINE OUTPUT L/R (AUDIO)," then go
to step 13.
If you connected an audio component
using either a digital optical or coaxial
cord, select "YES: DIGITAL OUTPUT."
20
Additional operations
To check the position of the buttons below,
see the illustration on page 21.
To Operation
Press x
Stop
Press X
Pause
Press X or H
Resume play after
pause
Press >
Go to the next chapter,
track, or scene in
continuous play mode
Press .
Go back to the
previous chapter,
track, or scene in
continuous play mode
Press Z
Stop play and remove
the disc
Change the angle Press /ANGLE
during playback.
Press /ANGLE
repeatedly to select an
angle number.
Display the subtitle Press /SUBTITLE
during playback.
Press /SUBTITLE
repeatedly to select a
subtitle language.
Replay the previous Press
1
scene* REPLAY during
playback
Briefly fast forward Press
2
the current scene* ADVANCE during
playback
3
Magnify the image* Press ZOOM
repeatedly. Press
CLEAR to cancel.
1
* All DVDs except for DVD+RWs/DVD+Rs/
DVD+Rs DL.
2
* DVDs only.
3
* Video and JPEG pictures only (except
BACKGROUND pictures). You can move the
enlarged picture using C/X/x/c. Depending
upon the contents of the disc, the zoom function
may be cancelled automatically when the
picture is moved.
Note
You may not be able to use the Replay or Advance
function with some scenes.
22
1-5
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your audio component.
If your audio component has a Dolby
Digital decoder, select "DOLBY
16:9
DIGITAL." Otherwise, select "D-PCM."
16:9
AUDIO SETUP
: OFF AUDIO DRC: STANDARD
AUTO DOWNMIX: DOLBY SURROUND
FULL
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
D-PCM
MPEG:
DTS: DOLBY DIGITAL
48kHz/96kHz PCM: 48kHz/16bit
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
D-PCM
DOLBY DIGITAL:
MPEG: PCM
DTS: OFF
48kHz/96kHz PCM:
OFF
ON
12
Press X/x to select whether or
not you wish to send a DTS signal
to your audio component.
If your audio component has a DTS
decoder, select "ON." Otherwise, select
"OFF."
13
Press ENTER.
Quick Setup is finished and connections
are complete.
If your audio component has an MPEG
audio decoder, set "MPEG" to "MPEG"
(page 54).
Playing quickly or slowly with
sound
You can listen to dialogue or sound while
playing the current scene quickly or slowly.
During playback, press FAST PLAY or
SLOW PLAY.
The speed changes when you press either
FAST PLAY or SLOW PLAY.
To return to normal playback
Press H.
Notes
• You can only use this function with DVDs,
VIDEO CDs, or Super VCDs only.
• "Operation not possible" will appear when
maximum or minimum speed is reached.
• During Fast Play or Slow Play mode, you cannot
change the angle (page 22), subtitle (page 22) and
sound (page 39). The sound can only be changed
for VIDEO CDs/Super VCDs.
• Fast Play and Slow Play functions do not work
when playing DTS sound tracks.
• You cannot use Fast Play or Slow Play function
when playing a still picture in DVD-VR mode.
Locking the disc tray (Child
Lock)
You can lock the disc tray to prevent children
from opening it.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and "LOCKED" appears
on the front panel display. The Z button on
the player or the remote does not work while
the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
Note
Even if you select "RESET" under "SETUP" in the
Control Menu (page 49), the disc tray remains
locked.