Vicsign HWQ series User Manual page 27

http://www.vicsign.com
6. Put the printed graphic to machine, the image need to put straightly.
7. Offline, let the blade move to the red dot place as following picture show(That is, The bottom right hand
corner as medium absolute origin ), press "Origin", after Coordinates reset, the new origin is ready, the plotter
output will come from the new origin for cutting.
Click "cut contour" and send
8. FLEXI software will automatically pop-up dialog, such as: machine brand name chose" Vicsign", select the
model name/number of the machine
User manual of HWQ series vinyl cutter
27 / 29