Operating Instructions; A.control Panel Illustration; Off-Line/On-Line - Vicsign HWQ series User Manual

http://www.vicsign.com
a Control Panel illustration
1. Offline
2. Origin
3. Test
4. Reset
5.Enter
6.Mode
b Off-line/On-line
When the cutter starts or resets, it becomes in online state. Press "Offline/Pause" button to switch to off-line state.
When computer transmits signals to the plotter, the plotter must be Online. The LCD will display the Speed/force
information as follows:

5 Operating instructions

pause 1.Switch On-line state to Off-line state
2, Can be suspended when cutting.
1. press" "" " to move car and "
2, Press the button at online state to read SD card file,
Text cutting effect
Reset and clear cache memory data on main-board.
After selecting SD file,press button,machine operates order.
1,Change "blade mode" to "pen mode"
2,MPX,MPY to adjust override.
User manual of HWQ series vinyl cutter
4
5
6
Origin" button to make old coordinates cleared, and set up new
origin.
press" "," " select file, then press "Enter" to work
17 / 29
1
2
3
" to move media, then press"