Reset - Black Box LW6004A Instruction Manual

PURE NETWORKING 802.11G WIRELESS ACCESS POINT WITH SWITCH
Once you've selected the new firmware file, click on the Apply button at the
bottom of the screen to start the upgrade process. (You may have to wait a few
minutes for the upgrade to complete). Once the upgrade is complete, you can
start using the access point.
4.2.9 R
ESET
You can reset the access point's system if any problem exists. The reset function
essentially reboots your access point's system.
Figure 4-19. Reset selected.
If the system stops responding correctly or in some way stops functioning, perform
a reset. Your settings will not be changed. To perform the reset, click on the Apply
button. You will be asked to confirm your decision. Once the reset process is
complete, you can start using the access point again.
Click on the Cancel button to cancel the reset.
48