PURE NETWORKING 802.11G WIRELESS ACCESS POINT WITH SWITCH
1. Decide where to place the Pure Networking 802.11g Wireless Access Point
with Switch. The best access point location is usually at the center of your
wireless network with line-of-sight to all of your mobile stations.
2. Connect the access point to your router, hub, or switch. Attach one end of
standard UTP cable to the access point's LAN port and connect the other end
of the cable to a switch, a router, or a hub. The access point will then be
connected to your existing wired LAN network.
3. Connect the DC power adapter to the access point's power socket. Use only
the access point's included power adapter. Using a different adapter may
damage the access point.
The hardware installation is complete.
12
3. Installation