Table of Contents
Advertisement
Table 4-14 (continued). DHCP server options.
Parameter
Start IP/End IP
Domain Name
Lease Time
Click on the Apply button at the bottom of the screen to save the above
configurations. You can now configure other advanced sections or start using the
access point.
4.2.7 C
ONFIGURATION
The Configuration Tools screen allows you to backup the access point's current
configuration setting. Saving the configuration settings provides an added
protection and convenience if problems occur with the access point and you have
to reset it to the factory default. When you back up the configuration setting, you
can re-load the saved configuration into the access point through the restore
selection. If extreme problems occur, you can use the Restore to Factory Default
selection; this will set all configurations to the original default settings (for
example, when you first purchased the access point).
You can designate a particular IP address range for your
DHCP server to issue IP addresses to your LAN Clients.
By default, the IP range is from: Start IP 192.168.2.100
to End IP 192.168.2.200.
You can specify the domain name for your access point.
The DHCP server, when enabled, will temporarily give
your LAN client an IP address. Lease time allows you to
specify the time period that the DHCP server lends an IP
address to your LAN clients. The DHCP server will
change your LAN client's IP address when this time
threshold period is reached.
T
OOL
CHAPTER 4: Configuration Utility
Description
45
Advertisement
Table of Contents
