NexxTech 2513092 Instruction Manual page 8

b. Click on the "Continue" button when the "User Account Control" dialog pops
up.
c. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive when the system prompts you "Insert the disc that came with
your USB Scanner", and click on the "Next" button. Afterwards, please skip
to procedure 7.
5. For Windows 7:
When the Setup/Application CD is for several scanner models
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Click Run install.exe in the "AutoPlay" window.
b. Click on the "Yes" button if the "User Account Control" dialog pops up. Follow
the instructions in the pop-up installation message.
c. In the "Device Manager" window, right-click on this scanner under "Other
devices" and select "Update Driver Software" from the pop-up menu. Click
"Browse my computer for driver software" in the window that appears, and
click the "Browse" button.
d. In the "Browse For Folder" window, select the folder or the CD-ROM drive that
contains this scanner driver and click the "OK" button to return to the previous
screen. Click the "Next" button. Afterwards, please skip to procedure 8.
When the Setup/Application CD is for one scanner model
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Click Run install.exe in the "AutoPlay" window.
b. Click on the "Yes" button if the "User Account Control" dialog pops up. If the
pop-up wizard window appears click "Next", and click "Install this driver
software anyway" in the "Windows Security" window then click "Finish" in the
wizard window. Afterwards, please skip to procedure 8.
6. During the process of the installation, a message "Windows can't verify the
publisher of this driver software" might be prompted. Please ignore it, and
click on [Install this driver software anyway] to continue the installation without
any misgiving at your scanner functioning.
7. When the system completes the installation, click on the "Finish" button.
8. Follow the on-screen instructions to install all software that your new USB
scanner requires.
9. After the software is installed, close all open applications and click on the
"Finish" button to restart your computer.
10. After the computer is restarted, you will be prompted to perform the scanner
calibration.
11. Insert the special calibration sheet, included with the scanner, face down into
the page feed of the scanner.
7