Step 2. Installing The Software - NexxTech 2513092 Instruction Manual

Note: If there is another USB device connected to the computer, connect the
scanner to an available USB port.
3. If you plan to connect your scanner to a USB hub, make sure that the hub is
connected to the USB port in your computer. Next, connect the scanner to
the USB hub.
Note: If you do not have a USB port available, you might need to buy a USB
port.

Step 2. Installing the Software

1. If the USB components on your computer are functioning correctly, they will
automatically detect the scanner causing the "Add New Hardware Wizard" or
"Found New Hardware Wizard" to be launched.
Note: If your computer was off when you connected the scanner, the "Add New
Hardware Wizard" message will be displayed when you turn the computer on
and when Windows starts.
Note: The USB hub is not included with the scanner. If using a hub, it is
recommended to use a hub with its own external power adapter.
2.For Windows 2000:
a. Click on the "Next" button when the "Add New Hardware Wizard" window is
displayed.
b. Select "Search For The Best Driver For Your Device [Recommended]" and
click on the "Next" button.
c. The next window will ask you where to search to find the drive. Select "
CD-ROM drive", and deselect "Floppy disk drives" if it is checked.
d. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive and then click on the "Next" button.
e. Click on the "Next" button in the window that appears.
f. During the process of the installation, a message "Digital Signature required"
might be prompted. Please ignore it, and click on "Yes" to continue the
installation. Afterwards, please skip to procedure 7.
3. For Windows XP:
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive.
b. Select "Install The Software Automatically [Recommended]" and click on the
"Next" button.
c. Click on the "Next" button in the window that appears. Afterwards, please skip
to procedure 6.
4. For Windows Vista:
a. Select "Locate and install driver software (recommended)" when the "Found
New Hardware" window is displayed.
6