Installing And Setting Up The Scanner; Step 1. Connecting The Scanner To Your Computer - NexxTech 2513092 Instruction Manual

USB jack that looks the same as the one pictured below. Note that on some
computers, the USB port at the rear of the computer may be occupied and
additional ports may be found on the monitor or keyboard. If you are having
trouble in locating the USB port on your computer, please refer to the hardware
manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which
usually appear as shown below.
USB connector(s)
If you don't find such USB ports on your computer, then you need to purchase a
certified USB interface card to add USB capabilities to your
computer.

Installing and Setting up the Scanner

Please follow the step-by-step procedures described below to install the Plustek
scanner.

Step 1. Connecting the Scanner to Your Computer

1. Plug the square end of the included USB cable to the USB port of the
scanner.
2. Plug the rectangular end of the USB cable to the USB port your computer.
5