Scanning From Di Capture Program - NexxTech 2513092 Instruction Manual

Attention •In the window that opens, choose this scanner and then click the
OK button to set this scanner as the default scanning source.
2. In BizCard Finder, click Scan
toolbar.
3. In the TWAIN window that opens, select Sheet Feeder as the Scan Type.
4. Adjust the scanning settings (Paper Size: Automatic Size, Resolution: 300).
5. Load one business card.
6. Click the Scan button.
7. The scanned images are displayed in the BizCard Finder main window, and
you may proceed OCR to convert images into editable text formats.
Click the Help button within the TWAIN window for more information about the
settings.

Scanning from DI Capture Program

1. Click the Windows Start button to launch DI Capture.
Select
the scanner
Folder pane
Scan settings pane
2. Within DI Capture, select this scanner from the drop-down list of
3. Select a document from the Folder Pane to store the scanned images.
(To create a new folder and/or a new document, click the New Folder and/or
New Document button from the toolbar.)
4. Select an appropriate scan profile. (You may click the tab of Scan Settings
Pane to check if the current settings of the selected scan profile meet your
needs. If not, you may click the Create or Manage button beside the Scan
Profile to create a new profile or modify an existing profile.)
5. Click the Scan – Append button from the toolbar.
6. When the scan finishes, all scanned images are displayed on the Browser
Pane. The last scanned image appears on the Viewer Pane.
from the main
Scan profile
13
Toolbar
Viewer
pane
Browser
pane