NexxTech 2513092 Instruction Manual page 13

2. Within Presto! PageManager, click Tools > Scan Settings > uncheck
"Suppress TWAIN User Interface" > OK. Click File > Acquire Image Data.
3. In the TWAIN window that opens, select Sheet Feeder as the Scan Type.
4. Adjust the scanning settings.
5. Load one page of the document.
6. Click the Scan button.
7. When the scan finishes, click the Exit button to close the TWAIN window. The
scanned images are displayed in Presto! PageManager, and you may
perform the image editing tasks.
Click the Help button within the TWAIN window for more information about the
settings.
Scan within HotCard BizCard Finder:
1. Click on the Windows Start button, point to All Programs > Business card
Recognition Software and then click Business card Recognition Software to
launch the Business card Recognition Software.
Attention If you have more than one scanner or other imaging devices
installed on your computer, you need to set this scanner as the
default scanning source before you acquire the TWAIN program.
•From the Main Toolbar, click Settings > Acquire Options > Flat
bed/TWAIN Scan, and then click Settings > Acquire Options >
Select Flatbed/TWAIN Scanner
12