Wired Audio Operation; Playing From An Wired Device - Nortek DMC Operation & User’s Manual

Table of Contents

Advertisement

Wired Audio Operation

Playing from an Wired Device

Portable digital audio players (MP3
players, etc.) can sit on top of the Bluetooth
Player's mini slide-out shelf.
Audio from the digital audio player's
headphone jack connects to the 3.5 mm
audio input jack on the side of the mini
slide-out shelf with the cable supplied.
The digital audio player can be charged
(whether its currently being used for audio
or not) using the USB charging jack on the
side of the mini slide-out shelf (USB cable
is not supplied).
✓ Note: Depending on their design, some digital
audio players may not accept a battery
charge when connected to the USB charging
jack on the device drawer.
Playing Audio from a Digital Audio Player:
1. Press POWER to turn on the DMC system.
2. On the Master Station, press SOURCE
repeatedly to cycle through AM, FM, CD
and AUX until you reach CD.
3. Press on the front of the Bluetooth Player's
mini slide-out shelf to unlatch the spring
lock and extend the shelf all the way out.
4. Connect the headphone jack on your digital
audio player to one end of the 3.5 mm audio
cable.
5. Connect the other end of the audio cable
into the audio input jack on the side of the
Bluetooth Player's mini slide-out shelf.
6. Set your digital audio player on top of the
shelf.
7. To charge the digital audio player (optional)
connect a charging cable between the
digital audio player and the USB jack on the
side of the shelf.
8. Select your music on the digital audio
player and begin playing. THE BUTTONS
ON THE BLUETOOTH PLAYER DO NOT
CONTROL A WIRED DIGITAL AUDIO
PLAYER, USE THE BUTTONS ON THE
MOBILE DEVICE.
9. The digital audio player's volume control
will affect the overall volume of the system,
set it about mid-level, then use the intercom
volume controls.
Playing Music
USB
CHARGING
JACK
CONNECT THE MOBILE DEVICE
TO THE AUDIO INPUT JACK
Figure 14. Audio Player on
Mini Slide-Out Shelf
✓ Note: To prevent damage, be sure to close the
Bluetooth Player's mini slide-out shelf when it
is not being used.
PRESS SOURCE BUTTON
UNTIL CD LIGHTS ON DISPLAY
CD
BE SURE POWER IS ON
Figure 15. Bluetooth Player Source Selected
SET THE MOBILE DEVICE
ON THE PLAYER'S
MINI SLIDE-OUT SHELF
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmcbt

Table of Contents