Bluetooth Player Setup; Wireless Connection; Device Pairing; Button Brightness - Nortek DMC Operation & User’s Manual

Bluetooth Player Setup

Wireless Connection

A mobile device (cell phone, music player,
etc.) can play audio and be controlled
through the Bluetooth Player with a
Bluetooth wireless connection.

Device Pairing

To create a Bluetooth wireless connection
with a mobile device, the Bluetooth Player
must fi rst be "paired" with the device.
The Bluetooth Player can only play audio
from one mobile device at a time, but it can
remember pairing for up to eight different
mobile devices.
Once paired, the Bluetooth Player will
automatically connect to the mobile device
when the Bluetooth Player is selected on
the paired mobile device.
Pairing with a Mobile Device:
1. Press ON/OFF to turn on the Bluetooth Player.
The ON/OFF button should be fl ashing.
2. Go to the Bluetooth setting in the mobile
device. Be sure the mobile device is set as
"discoverable".
3. Press PAIR on the Bluetooth Player. The PAIR
and ON/OFF buttons should alternately fl ash.
4. On the list of Bluetooth devices in the mobile
device, select "Nortek DMC Intercom".
5. After a few seconds, the mobile device
should pair with the Bluetooth Player. The
mobile device should show "Connected",
the Bluetooth Player should stop fl ashing,
and the ON/OFF button should light solid.
6. To add any additional mobile devices (the
Bluetooth Player can remember up to 8
total), turn off the Bluetooth in the previously
paired mobile device to disconnect it from the
Bluetooth Player (the pairing information will
be remembered), then repeat Steps 2-5 for the
next mobile device that needs to be paired.
7. After pairing all mobile devices, be sure to
turn Bluetooth back on for each device.

Button Brightness

The Bluetooth Player's button brightness
can be set to fi ve different levels. Press
the MUSIC/PHONE button to change the
brightness level (anytime with power on,
while not in speakerphone mode).
4
ON/OFF BUTTON
FLASHING BLUE
BLUETOOTH PLAYER BUTTONS
Figure 4. Player is On with No Connection
ON/OFF & PAIR BUTTONS
FLASHING BLUE
BLUETOOTH PLAYER BUTTONS
Figure 5. Player is Waiting for Pairing
ON/OFF BUTTON
SOLID BLUE
BLUETOOTH PLAYER BUTTONS
Figure 6. Player is On with Connection
FIVE BRIGHTNESS
LEVELS ARE AVAILABLE
BLUETOOTH PLAYER BUTTONS
Figure 7. Brightness Adjustment
PRESS TO ADJUST
BUTTON BRIGHTNESS