Playing Music; Intercom Source Selection; Bluetooth Operation; Player Power - Nortek DMC Operation & User’s Manual

Intercom Source Selection

The DMC intercom system selects audio
from four sources shown on its display
AM, FM, CD, and AUX.
To play music from the Bluetooth Player,
on the intercom system, select the CD
source on the DMC Master Station display.
Selecting the Bluetooth Player
as the Source:
1. Press POWER to turn on the DMC system.
2. On the Master Station, press SOURCE
repeatedly to cycle through AM, FM, CD and
AUX until you reach CD.

Bluetooth Operation

Player Power

To use the Bluetooth Player, press the
Player's ON/OFF button. The button will
fl ash blue for a few seconds while the
Bluetooth Player connects to a mobile
device.
If the Bluetooth Player's ON/OFF button
continues to fl ash blue, the Bluetooth
Player is not connected to a mobile device.
Check that a previously paired Bluetooth
mobile device is near (within 35 feet or
closer) to the Bluetooth Player. Check the
Bluetooth connection status on the mobile
device.

Playing Audio

Once the power on the intercom and the
Bluetooth Player is turned on, and CD is
selected on the intercom, audio can be
played from the mobile device.
Playing Audio from the Mobile Device:
1. Choose a music, streaming, or other audio
producing app on the mobile device and
begin playing.
2. All the buttons on the Bluetooth Player
should light while the audio is playing.
3. Use the ▲ VOL ▼ buttons on the intercom
to adjust the volume playing through the
intercom system.

Playing Music

PRESS SOURCE BUTTON
UNTIL CD LIGHTS ON DISPLAY
CD
BE SURE POWER IS ON
Figure 8. Bluetooth Player Source Selected
ON/OFF BUTTON BLINKS
UNTIL AUTO CONNECT
THEN TURNS SOLID BLUE
BLUETOOTH PLAYER BUTTONS
Figure 9. Player is Connected Ready to Play
WHEN PLAYING,
ALL THE BUTTONS LIGHT
BLUETOOTH PLAYER BUTTONS
Figure 10. Player is Playing Audio
Figure 11. Intercom Volume
INTERCOM
VOLUME
CONTROLS
5