Verifying Operation - Dacor Discovery series Installation Instructions Manual

Table of Contents

Advertisement

Anti-tip Bracket Installation for Top Grill
Models
Models DYF30BFTSL DYF30BFTSR, DYF36BFTSL
DYF36BFTSR
Read and familiarize yourself with the diagrams
below before beginning the following bracket
installation.
1.
Remove the sheet metal screw located at the top back
of the appliance, located inside the chassis, on the right
side (see diagrams below).
2.
Use the screw removed in step 1 to loosely attach the
anti-tip bracket to the appliance. Push the back of the
bracket up against the wall.
3.
Use the slot on the bracket to mark the hole position on
the wall.
4.
Rotate the bracket out of the way, and drill a 3/8" (8 mm)
hole in the wall at the point marked in step 3.
5.
Insert the wall anchor into the wall.
6.
Reposition the bracket against the wall and tighten the
sheet metal screw.
7.
Attach the bracket to the wall using a wood screw.
8.
Repeat the above steps for the other anti-tip bracket.
Top Grill Models
Wall
Top of
refrigerator
Anti-Tip Parts Detail
Wall
Top of
refrigerator
Anti-Tip Parts Detail
20
Installation Instructions
Existing
screw

Verifying Operation

1.
Read the use and care manual completely before using
the refrigerator.
2.
When the appliance is first plugged in, Stand by should
appear on the display.
3.
Turn to the Switching On and Off in the Operation
section of the use and care manual for first time start up
instructions.
4.
After turning on the refrigerator turn to Using the Ice
Maker for the First Time on the following page of
the use and care manual for important information on
setting up the ice maker.
IMPORTANT
Adjustment of the control panel settings is not possible
when the refrigerator is starting up for the first time.
Changes made to the control panel settings may not be
saved until the compartments have reached operating
temperature.
If the appliance fails to operate properly:
Verify that power is supplied to the electrical outlet and
that the appliance is plugged in.
Check all plumbing connections.
Check for kinks in the water supply line.
If the appliance still does not work, contact
Dacor Distinctive Service at (800) 793-0093 ex. 2822
Do not attempt to repair the appliance yourself. If you
need service, be sure to
have the model and serial numbers available when you
call. See the inside cover for location.
Dacor is not responsible for the cost of correcting problems
caused by a faulty installation.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents