Final Installation - Dacor Discovery series Installation Instructions Manual

Final Installation

Attach Unit to Cabinets (optional)
1. Drill pilot holes (for the wood screws) through the side
trim and into the adjoining cabinet(s).
2. Attach the refrigerator to the adjacent cabinets using
1/8-inch wood screws.
• If a custom side panel will be installed, see the side
panel attachment instructions.
3. After tightening the screws, open and close the
refrigerator door and freezer drawer to check for
interference.
Pilot Holes in Side Trim
Refrigerator
Side trim attached to
surrounding cabinet
Full Built-in Installation (Top View)
18
Installation Instructions
Attach Custom Side Panel (optional)
IMPORTANT: Dacor is not responsible for additional service
costs charged for removal of customer installed molding or
decorative panels required to service the refrigerator.
1. Attach the side panel to the support board in back and
attach to the refrigerator trim piece in front.
2. See diagrams below.
Side panel
Side panel
support board
Refrigerator
side trim
Built-in Installation with Side Panel
Support board
Side trim attached
side panel
Built-in Installation with Side Panel (Top View)
to
cabinet