Remove the Packaging
Remove tape and glue residue from surfaces before turning on
the refrigerator. Rub a small amount of liquid dish soap over
the adhesive with your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see Important Safety Instructions on page 1.
Dispose of/recycle all packaging materials.
Turning the Main Power Switch On/Off
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
If you need to turn the power to your refrigerator on or off,
you must remove the top grille assembly to access the power
switch. Turn the power to the refrigerator off when cleaning your
refrigerator or changing light bulbs.
Before Use
Refrigerator Operation
Clean Before Using
After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions in
Care and Cleaning.
Important information to know about glass shelves and
covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
Removing the Top Grille
1.
Grasp both ends of the top grille.
2.
Push the top grille straight up, then pull straight out. Lay the
grille on a soft surface.
B
A. Top grille
B Cabinet side trim
Replacing the Top Grille
1.
Insert the top grille hooks (located on the back of the top grille)
into the slots on the side trim.
2.
Pull the grille down slightly to lock into place.
To Turn the Main Power Switch On or Off:
1.
Remove the top grille.
2.
Press the main power switch to the
3.
Replace the top grille.
IMPORTANT: Be sure the main
power switch is set to the On
position after cleaning refrigerator
or changing light bulbs.
3
B
A
ON or OFF position.
A. Power switch
A