Motorola DCH100 User Manual page 28

6 TROUBLESHOOTING
Problem
The remote
control does not
work.
Possible Solutions
•
Verify that the remote control is in "Cable"
mode.
•
Verify that there are no obstructions
between the remote control and the DCH
receiver. Aim the remote control directly at
the DCH receiver front panel, not the TV or
VCR.
•
If using an external IR senor connected to
the EXT IR input on the rear panel, ensure
the cable is properly connected to the rear
panel input and that there is a clear line-of-
sight from the remote to the sensor.
•
The angle between the remote control and
the DCH receiver may be too large. Stand
in front of the DCH receiver and not too far
to either side.
•
Press and release operation keys one at a
time, firmly and deliberately.
•
Check the batteries in the remote control.
Install new batteries if needed.
18