Table of Contents
Advertisement
Battery usage
Use only the supplied power adapter to charge the battery.
O
O
Use only the supplied battery. Using an unapproved battery may cause your camera to
O
O
explode and result in serious damage to your health or property.
Do not disassemble the battery or throw the battery in fire as it may explode.
O
O
Do not short-circuit the battery by connecting metal objects to the battery's positive (+)
O
O
and negative (-) terminals. Doing so may cause the battery to generate heat and result in
burns or property damage.
Keep conductive material such as jewelry, keys or beaded chains away from exposed
O
O
terminals to avoid short circuit.
Incorrect use of the battery may cause a leak of chemicals or explosion. The leak of
O
O
chemicals may harm the skin and erode the metal contacts. If any chemicals leak from the
device, use a dry cloth to wipe it clean and contact your BenQ dealer or service center
for help.
CAUTION:
Risk of explosion if battery is replaced by an incorrect type.
O
O
Dispose of used batteries according to the instructions.
O
O
Safety instructions for underwater use
To ensure the water resistance of your camera, all covers, including the cover for the
O
O
charging port of the Live-view RC watch, must be firmly closed.
Assemble the waterproof case to the camera and use desiccants before using the camera
O
O
in cold, humid environments or going underwater. The camera itself and the battery are
not water resistant.
The desiccants provide limited anti-fog protection only and are not designed for long-
O
O
term use. Replace the desiccants regularly.
The waterproof case is in compliance with the Ingress Protection Marking ratings IPX8,
O
O
meaning that, with the waterproof case assembled and locked, your camera is protected
against low pressure water stream as well as against the effects of immersion for
60 minutes in fresh water up to 60 meter deep.
Avoid opening or closing the waterproof case near the water's edge, such as sea, lake,
O
O
beach, and so on. Do not open or close the waterproof case lock with wet hands or
hands with sand or dust.
Do not drop the waterproof case.
O
O
Check the following items indoors before using the camera underwater:
O
O
Ensure that the waterproof case is assembled to the camera correctly and locked.
O
O
Clean the area surrounding the waterproof case lock. Ensure there is no dirt, sand or
O
O
foreign objects near it.
Ensure that the waterproof case has no cracks or scratches. If you spot a leak, contact
O
O
your BenQ dealer for an inspection or service.
Place and use the waterproof case only at temperatures between 0 °C to 35 °C.
O
O
9
Hide quick links:
Advertisement
Table of Contents
