Rf Exposure; Ce Sar Compliance; Caution; Limit Your Exposure To Radio Frequency (Rf) - BenQ QC1 User Manual

RF exposure

CE SAR compliance

This camera meets the EU requirements (1999/519/EC) on the limitation of exposure of
the general public to electromagnetic fields by way of health protection.
The limits are part of extensive recommendations for the protection of the general
public. These recommendations have been developed and checked by independent
scientific organizations through regular and thorough evaluations of scientific studies. The
unit of measurement for the European Council's recommended limit for mobile devices
is the "Specific Absorption Rate" (SAR), and the SAR limit is 2.0 W/kg averaged over
10 gram of tissue. It meets the requirements of the International Commission on Non-
Ionizing Radiation Protection (ICNIRP).
For body worn operation, this camera has been tested and meets the ICNIRP exposure
guidelines and the European Standard EN 50566 and EN 62209-2, for use with dedicated
accessories. Use of other accessories which contain metals may not ensure compliance
with ICNIRP exposure guidelines.
SAR is measured with the device at a separation of 10 mm to the body, while transmitting
at the highest certified output power level in all frequency bands of the device.
The maximum SAR value is 0.845 W/kg over 10 gram of tissue.
SAR is measured when the camera is at its highest transmitting power. However, the
actual SAR of your camera is usually below the test level. This is because your camera is
designed to use the minimum power necessary to upload videos.

Caution

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.

Limit your exposure to radio frequency (RF)

Keep your camera at least 10 mm away from your body while uploading videos.
O O
You can find more information from the WHO fact sheet N°193 on the WHO home
O O
page at: http://www.who.int/mediacenter/factsheets/fs193/en
62